Shimano Deore / Tektro Compatible Disc Brake Pads

€ 5.99

Designed for replacing your Shimano Deore M515, M525 etc. and Tektro Auriga Aquila, Gemini, etc. disc brake pads.

More details
SKU: S117956 (528147)
Select a color:
    Select a size :
Size Guide

Out of stock

Our e-commerce is suspended for a transition period. We expect to be back soon!
Product benefits
  1. Compatibility
    Shimano Deore M515, M395, M525, C501, C601, M475, Tektro Auriga, Aquila, Gemini
  2. Braking power
    Effective even in water and mud.
  3. Abrasion resistance
    Sintered material with high coefficient of friction.Lasts 2 x as long as organic
  4. Brake control
    Guarantees steady braking.
Product feature
  1. Contents
    1 pair of brake pads 1 spring metal pin not included
  2. Wearing in your brake pads: essential before starting your ride
    You will need to do several short, sharp stops on a flat, clear surface. Squeeze the brakes hard briefly 10 times, and repeat for three or four sets, to wear in your brakes. Braking sharply will wear the pad slightly. Wait about 30 seconds between sets of braking so that the temperature of your brakes will drop back down before you do a new set of 10 squeezes
  3. Watch out for glazing
    If the problem persists despite doing this short, sharp braking, take some sandpaper and lightly sand your brake pads.
Product testing
  1. Composition
    Brake : 100.0% Aluminium
  2. Cleaning advice
    Take care not to touch the seal with your fingers and do not spray with oil, grease, spray, etc.
  3. Product restrictions
    Do not spray with oil or All-in-One
  4. Product catchline
    For Shimano Deore and Tektro disc brakes.
  5. Lab tested
    model tested and approved in the lab
Product reviews
4.2 / 5
4 reviews
4 users recommend this product
Write a review
  • Good, not great

    Praveen (India)
    Used for More than 1 year
    I've used these replacement brake pads multiple times for my MTB (Rockrider 500). I've found the following positives and negatives:
    1. Cost
    2. Braking is as effective as with the original pads that come factory fitted
    1. The friction material is very thin and does not last very long (as a comparison, the factory fitted pads lasted ~ 10,000 Km whereas these last only about 1500 - 2000 Km)
    2. The pad, when worn out, fades out completely very abruptly. This could be rather dangerous. I lost braking on the front brake, very fortunately, when running errands close to home. I had done a Nandi ride just the previous weekend and it could have proved catastrophic if it had happened then.
    3. There is no replacement split pin to use with the pads. This is a pain point since I need to go to a hardware store to get a new split pin or reuse the old one (which is really not recommended and can be very unsafe - which, by the way, is done by the Decathlon store mechanics themselves, since they do not have replacement split pins)
  • Perfect for Tektro Auriga brakes.

    Keith (United Kingdom)
    Used for 1 week or less
    Exactly what you would expect. Not an expert, all I know is my bike now stops.
  • tektro pads

    neil (United Kingdom)
    Used for 2 to 8 weeks
    very good value quick delivery. as good as any pads i`ve used before.
  • Tektro pads

    STEFAN (United Kingdom)
    Used for 2 to 8 weeks
    Used on Specialised Rock hopper to replace original Tektro pads. Working great on my hydraulic discs. These get hard use as I also use the bike to commute with some heavy downhill sections.
    Straight forward direct replacements